মঙ্গলবার, ২৯ এপ্রিল, ২০১৪


Now mobile phone is the most used device all over the world.Think about it before some years mobile phone user was limited.But now we can see mobile phone in every hand.We can't go even a single day without mobile phone.So mobile phone user is increasing day by day.
To face the demand mobile phone company is producing their products in different places to reduce their cost.Sometimes they are making this device in China,India and many other places where cost is low.So you should check your cell quality.

How To Check Cell Phone Quality By IMEI:

First of all you should know what is IMEI: IMEI stands for International Mobile Equipment Identity.It is a 15 digit number which may be found by removing back cover and it may be placed on battery sticker.

You can check IMEI by another way.Just type *#06# in your mobile and you will immediately see a 15 digit number in mobile screen.



The number might be shown as below:

                                                2 3 1 1 5 6 0 5 2 2 6 5 1 2 5

Now look at the 7th and 8th digit.This digit will ensure you about your phone quality.

1.If the 7th and 8th digit are
 00 this indicates that your phone is manufactured in original factory which ensure your phones best quality.

2.If the 7th and 8th digit are 01 or 10 this indicates that your phone is manufactured inFinland which ensure your phones high quality.

3. If the 7th and 8th digit are 13 this indicates that your phone is manufactured inAzerbaijan  which is too bad and Dangerous for health.

4.If the 7th and 8th digit are
 02 or 20 this indicates that your phone is manufactured inEmirates which is poor quality.

5.If the 7th and 8th digit are either
 03/30 or 04/40 this indicates that your phone is manufactured in China.But it's quality is good.

6.If the 7th and 8th digit are
 05 or 50 this indicates that your phone is manufactured inBrazil or USA or Finland.

7.If the 7th and 8th digit are
 06/60  this indicates that your phone is manufactured inChina, Hong kong or Mexico.


বৃহস্পতিবার, ২৪ এপ্রিল, ২০১৪

অনেক সময় ধারণক্ষমতার তুলনায় অতিরিক্ত
সফটওয়্যার ব্যবহার করলে কম্পিউটার চালু
এবং বন্ধ হতে বেশি সময় লাগতে পারে।ছোট
কিছু সেটিংসের পরিবর্তন করে চালু এবং বন্ধ
হওয়ার সময় কমানো যায়। উইন্ডোজ
এক্সপি অপারেটিং সিস্টেমের ক্ষেত্রে Start
মেনু থেকে Run-এ গিয়ে msconfig
লিখে এন্টার করুন। Startup ট্যাব
থেকে অপ্রয়োজনীয় স্টার্টআপ প্রোগ্রাম
বা আইটেমগুলোর টিক চিহ্ন তুলে দিন। এই
তালিকার আইটেমগুলো কম্পিউটার চালু হওয়ার
সঙ্গে সঙ্গে লোড হয়। অপ্রয়োজনীয়
প্রোগ্রাম লোড হওয়ায় কম্পিউটার চালু
হতে সময় নেয়। তাই যেগুলোর প্রয়োজন নেই,
সেগুলোর ডান দিকের টিক চিহ্ন তুলে দিয়ে OK
এবং Apply করে বের হয়ে আসুন। কম্পিউটার
আবার চালু বা রিস্টার্ট করতে চাইলে Exit
Without Restart নির্বাচন
করে সেটি এড়িয়ে যান। এবার Notepad
খুলে del c:/windows /prefetch/
ntosboot *.* (*.* হচ্ছে এ-সংক্রান্ত সব
ফাইল মুছে ফেলবে) কোডটা লিখে ফাইল
থেকে Save As চেপে ntosboot.bat
নামে ডেস্কটপে সংরক্ষণ করুন। এবার ডেস্কটপ
থেকে ntosboot.bat ফাইলটি কপি করে C:/
ড্রাইভে পেস্ট করুন। Start থেকে Run-
গিয়ে gpedit.msc লিখে এন্টার করুন।
Computer Configuration
থেকে Windows Settings-এ ক্লিক
করে Scripts (Startup/Shutdown)-
আবার ক্লিক করে সেটি খুলুন। ডান পাশের
Shutdown-এ দুই ক্লিক
করে সেটি খুলে Add-এ ক্লিক করে Browse
থেকে C:/ ড্রাইভে গিয়ে ntosboot.bat
ফাইলটি দেখিয়ে দিয়ে OK চেপে Apply-
ক্লিক করে আবার OK চেপে বের হয়ে আসুন।
এবার Run-এ গিয়ে devmgmt.msc
লিখে এন্টার করুন। এখানে IDE ATA/ATAPI
controllers-এ দুই ক্লিক করে Primary
IDE Channel খুলুন। Advanced Settings
থেকে Device 1-এর Device Type-None
নির্বাচন করে OK চেপে বের হয়ে আসুন। এর
পরের Secondary IDE channel-এ দুই
ক্লিক করে সেটি খুলে একই নিয়মে Advanced
Settings থেকে Device 1-এর Device
Type-None নির্ধারণ করে OK চেপে বের
হয়ে আসুন। সব কাজ যত্ন
সহকারে করে কম্পিউটার রিস্টার্ট করতে হবে।
এখন থেকে প্রত্যেকবার কম্পিউটার চালু
এবং বন্ধ হতে আগের তুলনায় অনেক কম সময়
লাগবে।